5-Pack Titanium Nitride-Coated Carbide Material Drill Bits, 15/64-Inch (6mm) 5 Identical Bits, 4-Flute Sawtooth Design, Eccentric Stabilization Tips for Masonry, Porcelain Tile, Wood, Drilling Accessories for Contractors, DIY Projects

5-Pack 6mm Four-Flute Drill Bits with Titanium Nitride Coating

Product Description

Prepare for installation and renovation tasks with this set of five matching 6mm drill bits. Each bit features a four-flute design, serrated cutting edges, and an eccentric cutting geometry.

YG6X carbide construction with a titanium nitride coating provides a wear-resistant cutting surface. Intended for compatible tile, non-tempered glass, and masonry applications. Suitability depends on material type, hardness, thickness, and the manufacturer’s drilling instructions.

Key Features

Four-Flute Design
Four channels help move drilling debris away from the cutting area. Clear accumulated debris regularly to maintain controlled operation.

YG6X Carbide with Titanium Nitride Coating
Combines a hard cutting material with a wear-resistant surface coating for repeated drilling tasks.

Eccentric Cutting Geometry
Designed to assist controlled starting and cutting. A suitable drilling guide may be helpful on smooth or curved surfaces.

Serrated Cutting Edges
Sawtooth-style edges engage compatible materials during drilling. Use appropriate speed and pressure for the surface.

Five Matching 6mm Bits
Includes five bits of the same diameter, providing replacements for repeated hole-making tasks in workshop and renovation projects.

Specifications

Quantity: 5 Drill Bits

Diameter: 6mm Each

Cutting Material: YG6X Carbide

Coating: Titanium Nitride

Flute Design: Four-Flute

Cutting Geometry: Eccentric, Sawtooth-Style

Set Configuration: Five Identical Sizes

Installation & Use Guide

Check compatibility: Confirm that the bit is suitable for the material and that its shank fits your drill chuck.

Disconnect power: Unplug the drill or remove its battery before fitting or changing the bit.

Install securely: Center the shank in the chuck and tighten according to the drill manufacturer’s instructions. Remove the chuck key if applicable.

Prepare the surface: Support and secure the workpiece. Mark the drilling location and use a suitable guide where needed. Avoid striking glass or tile with a center punch.

Begin carefully: For glass and tile, use rotary mode without hammer or impact action. Start slowly with light, controlled pressure.

Manage heat and debris: Follow the manufacturer’s material-specific speed and cooling instructions. Stop the tool before removing accumulated debris.

Finish and store: Allow the bit to cool before handling. Clean, dry, and store after use.

Safety & Care

Wear eye protection and use appropriate dust control when drilling masonry. Do not drill tempered glass. Check for concealed wiring and pipes before drilling walls. Avoid forcing or twisting the bit, and stop using it if chipped, bent, or damaged.

After-Sales Service

For missing or damaged items, compatibility questions, or assistance with product use, please contact us through TikTok Shop. We will review your concern and assist with an appropriate solution.